School skirt No.2

This is a very simple 8 gored skirt, fastened with a zip and some poppers to fasten the waistband. As per usual such a simple project took loads more time than it should have done. This was going be my "full" skirt but it didn't end up as full as I wanted it to be so next time I'll enlarge the sides of the pattern pieces or I'll just do a full circle skirt.
The fabric was a mistake. 1.99 polycotton which fluff sticks to like nobody's business! Never again! Nightmare to cut out!
I finished the hem with white bias binding as I had no black in my stash and being 16 and living in the country I just can't pop out and get some. It's okay, nobody can see it anyway. I recently found out that you are supposed to lift the bias a couple of cm's above the hem and then slip stitch it so I'll do that next time.
Please forgive me for the zip not being central, the skirt just needs twizzle-ing round a bit. The zip was a nightmare as it just kept bubbling which I think was due to one side being longer than the other, but it's all sorted now. I did want to go for an exposed look.
All in all this skirt does it's job well. It works nicely with blazers and is perfect for school wear. It's a pity the fabric was such a let down, but hey, we all learn from our mistakes right?
Anyway, thanks for reading!
Lauren x

Pinafore Dress

  Lately I've been seeing a lot of pinafore dresses around and I liked the look of them so much that I put one on my list to make, but the plan was to make one out of corduroy. I decided a couple of months ago that I'm not a fan of plaid, but now I feel that I've come round to it. I do love the colours of this one.
Mum kindly donated to me a load of flannelette that she originally bought for some cosy pjs years and years ago but decided that in reality it was never going to be used. Originally I wanted to make a shift dress with it, which seems perfect for winter with all of the shirts that I can layer under it, but mum suggested a pinafore dress. It seemed like an alright idea so I went with it, and now I just love it!
I used a basic circle skirt pattern for the base, and added a square for the front, shoulder straps and butttons and tada! Actually it turned out to be a lot longer process than it sounds. I had many issues with buttonholes, so in the end had to resort to using snaps and just sewing the buttons on time. These issues involved the unpicking of buttonholes, which I sincerely hope that you will never have to do. It was painful. If you're really looking for traces of them you will find them but they don't really stand out.

I did originally have the straps crossed a lot lower down, then when trying on I couldn't actually get it on, so it had to be unpicked and resewn higher up. Now though, I realise that I could have just put a popper on that as well.
 Look how well it matches!!! Was totally planned...
 My friend Meghan, whom I shall call the Director of this rather fabulous photoshoot (you can thank her for all of the poses) lent me her rather voluminous petticoat to show the pinafore to its maximum potentional. It has built in knickers in it! Genius for someone like me, that seems to accidentally flash the world far too often. I tried to swish away home in it, but unfortunately she caught me in the act and I had to return it to its rightful owner :(
That's about all I have to say so I thought I'd leave some of the out-takes for you to enjoy.
Tons of thanks to Connor for taking the photos and Meghan for telling me where to put my arms.
Thanks for reading!
Lauren x

Floral Top

This is yet another top that I made for my sixth form wardrobe. The fabric was originally a skirt but it seemed to me that it would be a lot more wearable as a top, so a top it has become. For such a simple garment, I had to do far too much unpicking. I started off using a pattern, but it was rubbish as the armholes and neck were far too tight, in fact I couldn't even get it over my head. So, I unpicked the armholes and re-sewed them. 
Because this top was originally a skirt, the only way I could fit the pattern piece in was to have a seam in the back which was fine. I first wanted to unpick the first 8 inches or so from the seam and put a zip in. However, the zip I had in mind was metal, and so I felt that it was too heavy and would ruin the drape of the garment, so I still unpicked the 8 inches but just put a popper at the top. And there's me showing you what its like when I undo the popper. You also get a nice view of the bias binding.
I whipped up a bow belt to go with the outfit at lunch, an hour before these photos were taken. Lunch time now seems to be my hand sewing time. This belt was very similar to the one I made for my prom dress. It was made from the waistband of the skirt so it was already handily interfaced and fastened at the front with poppers.
That's everything so thank you for reading!
Oh and thanks again to Ainjiel for the photos!
Lauren x


School Skirt No.1

This year I entered sixth form, and the school uniform requirements have changed. From years 7 to 11 (aged 11-15) English schools typically wear a uniform. Mine consisted of a green blazer, green and white stripey blouse (fondly nicknamed the “toothpaste” blouse ) and a green pleated skirt. It was not pretty. But for the next two years of sixth form the dress code is extended to “work wear” which basically means that you need to wear skirt suits and trouser suits with a top of your choice. No dresses allowed :( So, I decided that there would be no point in buying any of this stuff (except blazers, I’m not quite at that level of expertise yet) so most of my sixth form clothing has been me-made. This is the first skirt.

I feel like a can’t really call this skirt a pencil skirt because it doesn’t go in enough at the legs so I think I’ll call it a straight skirt instead. This was my first attempt at lining a skirt and it went fairly well. I only attached it at the waistband and the zip as I was afraid that if I hemmed it to the outer material it would affect the drape. I wish I had interfaced the waistband as I can now see why you’d want to because it just isn’t stiff enough. I didn’t sew the zip in high enough so had a little gap between the end of the zip and the waistband so instead of unpicking the zip I cut out a patch of the same fabric and sewed one side to the left hand side and sewed a popper to the other. It worked but it definitely wasn’t the correct way to do it.


 The pattern I used was New Look 6335. It was an unlined pattern, but I just cut the same pieces as I did for the outside, excluding the waistband. I ended up cutting so much off the length that the split went entirely which does make it more difficult to run to the bus stop in the mornings. NB: Next time, please put one in! The only adjustment I made was to shave a couple of inches off each side to fit my baby hips.




As you can see in the pic above, I had a few issues with darts. Typically, a week later we did darts in textiles and so now I know exactly what to do. Funnily enough, the teacher pointed out this skirt as an example of darts. I should probably have let her know that I made it. The table below is one I made as part of my coursework and I thought that it might be useful for some people.


This pic just shows off the lining underneath. I was rushing so both the lining and the exterior fabric were hemmed by the machine. The issue I’m having is that the lining is so slippery that it twists the skirt around as I walk. Maybe this is because It just isn’t tight enough?



Yay, you can’t really see the zip in the back! Instead of the button and buttonhole required by the pattern I used a popper. I tried to make a buttonhole. It was perfect on the practice time, the moment I put the real thing through the machine I get nothing. And I didn’t change anything! Argh it’s so frustrating. But a popper will do for now, until I figure out how to do them.


Please excuse the hole in my tights. This was after a long day of school. On fridays, sixth formers at my school get to go home one hour early. Because of buses that was impossible so we had a lovely trip to costa instead. En route I conned one of my new school friends Ainjiel-Shaolee Clark into taking these beautiful photos for me. Thank you Ainjiel!
‘Til next time,
Lauren x

Floral Shift Dress


This dress has been brilliant to wear this summer (or for the hot days we’ve had this summer) as it’s so light  and loose, but still has shape to it. It has been worn many many times and is just generally amazing. And I have no idea why I can’t stand upright like a normal person. Sorry for the creases, it was in my bag all day as I was going over to a friends to take advantage of his fancy camera (again) and it’s made of linen. The neck, armholes, and hem were all slip-stitched in on the ferry to France.


I used the vintage Simplicity 5421 teen pattern which was age 14. At the age 0f 16 my bust is 3 inches smaller than that of a girl aged 14 so this dress required A LOT of alteration in that department. Actually it required a lot of alteration in every department. I took about 3 inches out of the centre front and a fair bit out of the side seams and out of the princess seams as well. I did make a mock up but have mysteriously lost the centre front which is the piece that I altered the most, so I if I make it again I’m going to have to refit it all again. Sigh.

Image found here: http://vintagepatterns.wikia.com/wiki/Simplicity_5421_B
When it was all altered it did fit really well, but was just loose enough to keep cool during the hot weather. I probably should mention that it was originally about 3 inches longer than this so I’m paying my dues for not pre washing it beforehand. The fabric by the way was gifted to me by one of my friends mums with about 3 other bin bags full of fabric! The zipper was originally hand sewn in but it wasn’t strong enough so I lapped it on the machine as well to make it as secure as possible.



That’s all I can think of to say about this dress at the moment so bye for now!
Thanks for reading!
Lauren x