Summer ball dress 2016!

Hello all! Today I have to present to you: this years Summer Ball dress, to end my first year of uni. Before I begin, in this photoshoot it was blowing a gale and it seems I completely lost my ability to form any passably attractive facial expression, so if you could just glaze over the very prominent outline of my legs and my stupid face that would be great.
I always knew that I wanted to use the drop waisted Vogue pattern for the skirt, which I used for a dress a few months back. I knew I wanted a halterneck type bodice which was gathered into the waist. And finally I wanted it to be emerald green silk.

I found the emerald silk from Goldhawk road for £12 and bought the rest of the bolt which was just over 3 metres just before Easter. Cut to the last week of term, in at uni 10-5 , a flood of other peoples alterations for Summer Ball and the Ball itself on Friday night. In the end I had about 6 hours to put this dress together. As the guys on sewing bee know; this is not long enough.
I planned to drape the bodice and just lengthen the skirt from the pattern so I decided to work on the skirt first. Thursday night, 9pm: the making begins. I ended up just using the yoke pieces and the tops of the skirt pieces from the pattern, using 2 rectangles of fabric gathered into the skirt instead of a trapeze shape, with the top of each rectangle vaguely resembling the shape of the yoke.
 I interfaced the yoke to give it a bit more structure which turned out to be a good shout. It did need taking in a bit on either side so it sat properly at my waist. 1 of the side seams turned out a bit funky. I didn't cut very carefully so it's probably horribly off grain. 11pm: Sort out Benjie's trouser hems.
I tried draping the bodice halterneck style but it just wasn't working for me. I take the only scraps left from the skirt, knot them at the back of the neck, tuck them in at the waist. I thought that looked alright, and I was falling asleep at this point so called it at night at 2am.
Friday afternoon: 3pm. Put straws in hair. Attach bottom of bodice to skirt. Handpick the invisible zip into the centre back seam because zipper foot is no where to be found and time is flying at the speed of light. 4.30pm: Roll hem all edges of the bodice. 5pm: have disgusting kebabs for tea which were far too hot and even Philadelphia couldn't cool them down.

5.30pm: Get nice friend Amy to level off the hem. Realise that no hemming is going to happen and just say positively, "At least the fabric doesn't fray so much". Find and apply nipple covers. 6pm: Look in the mirror and cry a little inside. Take out straws and do make up. Make way for thoroughfare of people coming in to use the iron. 7.30pm: Iron! 7.45pm: turn up at pre drinks that started at 6.30. 
I really quite dislike this dress. I think it makes me look like a lampshade. It did get finished enough to wear though. My tactic was to dance so hard that no one got a chance to see that I looked like a lampshade and I think it worked. A few compliments did float my way. I love the fabric though so I think I'm going to rip up this dress and remake it into this dress.

Thanks for reading, to Amy for all of her help and to Edward for taking pics in our local field!
Lauren xx


Comfy pants!

Hello all! It seems so wrong to call these comfy pants, but it seems worse to call them comfy trousers, so comfy pants they are! I bought a metre of black jersey because I was panicking about not having enough black clothes for something, but the event passed and I was left with a metre of black jersey on my hands.
This year has truly been the year of loungewear for me. I lived in uni halls from September to June and I needed something comfy to change into between getting home from uni and going to bed. It's basically been a year of loose knit tees and Hudson pants. So I decided that this fabric would be well worth it's £4.99 price tag if it were made into loungewear. Never mind that I only got round to finishing them after uni had finished. I haven't taken them off all week! (n.b. that was exaggerating for comedic purposes. I did wear a few other things. Just a few though.)
I tried to knock them together before a family outing one Sunday while I was back home for the weekend a few months ago, but surprisingly it didn't quite work out. I was super close, but then the overlocker needle snapped and it was game over. On a side note, this camera angle has done wonders for my derrière.
They were super easy to put together though. I've even drawn you up a handy little diagram. To draft my pattern I folded both selvedges into the centre of the fabric. I put my crotches in the centre but it actually makes much more sense to put them on the edges cuz that's 2 less seams to sew! I then cut down the middle, and cut off some width at the end for the waistband and cuffs.
To sew them together, you  need to sew the crotch seams up and sew the side seams up. I then gathered the waist with elastic and sewed it to the waistband right sides together. I tried to gather the cuffs with elastic but there was too much volume to gather it to the elastic and I broke a needle while trying, so I abandoned the elastic and gathered it straight onto the cuff, which was roughly the width of my ankle. I sewed one cuff without marking the side seams on the legs and cuff and one matching the side seams together and the gathering is so much more even on the second.
I am so pleased with how well these turned out! They are super super comfy and I would like them in all the colours of the rainbow.
Thanks for reading and to Emma for taking pictures! I hope this kind of tutorial is kind of coherent. If you have any questions, please let me know below!
Lauren xx


Dino Boxers

In the past year, I have bought metres and metres of metres of dinosaur fabric to fulfil various requests after seeing my dino pjs. After being challenged to make some dino boxers I accepted and got cracking on finding a pattern. I looked at drafting my own, but found it nigh on impossible to find instructions on drafting a tight fitting boxer short, which is most men's preference today. (I did a little informal survey to confirm this.) So then I had a little look for patterns and stumbled across makemypattern.com. And the rest, as they say, is history.
I asked Harry what he had to say about them and he put it better than I ever could: "The Original Digby Dinobox 3000's are the comfiest pair of men's Lounge wear that I have come across in a long time. The subtle but necessary elastic waist band gives you the security you need, also unlike other elastic waistbands that I have come across, this one is not itchy or uncomfortable.I also like the size of the waistband, it shows youth, but doesn't give off the ASBO vibe that you get when you see a white pair of CK's on show."
"The print, is top shelf, who doesn't like dinosaurs?? The stitching, seems sturdy for now and I have no reason to believe that it will give up on me any time soon. All in all, these boxers make you feel like a kid, whilst looking adult. They are fantastic! 9/10"
Harry Haywood
Boxer Wearist
As for sewing details, I zigzagged it all on my sewing machine because my overlocker was left at home while I was at uni. I used white waistband elastic from the sewing chest. Harry chose the placement of the label.
They were super easy to put together, only taking about half an hour once they were cut out.
I'm super pleased with the pattern. You input your models measurements into the computer and then a pattern is generated based on those measurements. There weren't many pages to cut out and they didn't take very long to put together at all. (Especially with two other pairs of hands). The instructions were very clear also.
 
Thanks for reading and thanks so so much to Harry for modelling (and doing a stella job at it I might add) and helping to put the pattern together and do some cutting out along with Dan. And thanks to Ieuan for being a fabulous measurer and photographer.

Lauren xx

Closet Case Files Sophie Swimsuit!

You guysss!! I'm so excited to show you my version of Heather Lou's latest pattern; the Sophie Swimsuit. I chose to test the view B, the bikini version.
First, the fabric. This is the swimsuit fabric I bought with Susan when I visited Sydney a few summers back. It's been waiting for the perfect swimsuit pattern and I knew that it would be perfect for Sophie. The only drawback is that the style lines aren't so obvious. I look forward to playing with them at a later date. For the findings I used a waterproof elastic and bikini clasp from Minerva crafts.
Compared to the last pair of bikini bottoms I made these are like heaven. Finishes at the right point on the waist and the 'leg holes' for want of a better term, are spot on. I forgot that I was wearing them, which is really the ideal goal. There's nothing worse than going swimming and constantly fiddling, pulling something down, tugging something up. I could truly be care free in this. 
And now onto the bikini top. I live in constant despair that my 29" bust isn't big enough for sewing patterns but all of the work Heather has done with different cup sizes means that I actually had a chance of it fitting, and it did! 
I didn't use an underwire. I don't have an underwire in any of my bras, cuz I just don't need one! I did the jumping test in this and it passed with flying colours.
I had a bit of a muddle getting the right cup pieces in the right place at the right time, the right way out. But I got there in the end.
Oh, and it's also fully lined which felt very luxurious. 
Argh I'm so so happy with how it turned out! I was a bit concerned about how a bikini top and high waisted bottoms would work on my because my torso is a bit of a tree trunk, but I like it. I think next time I'd like to use view A for the whole suit and then cut it at the waist to make a tankini. I also want to make a bra!
Thanks for reading and to Heather for letting me test her pattern, Zoe for taking photos and providing mini paddling pool and props and to MK for being Left Water Pourer and Millie for being Right Water Pourer. Much obliged.
Lauren xx