Floral Playsuit

Hello all!

Welcome to another one of my Me Made May makes. It’s quite a boring one I’m afraid, with minimal drama. The plan was to use the pattern I made for my shirred back crop top in April as a base and add some shorts on to make it a playsuit.

The fabric is a floral viscose left over from a testing the Closet Case Patterns Fiore skirt. It’s from one of the shops on Goldhawk road and was £10 for 2 metres! Bargain. It’s actually washed and worn very well so far., considering the price.

I used the pattern that I made for the crop top, lowering the neckline, widening the armhole and taking in the side seams. I then used my shorts pattern, adding 1.5cm to the crotch to give me a bit of wiggle room as it’s a playsuit. I slashed and spread the back waist of my shorts pattern to match the width of my pre-shirred panel so they would match nicely together. and gather up together.

I think it took a morning to sew up, and came together pretty nicely. The neckline and armholes are finished with bias binding which is topstitched into place. The armhole binding extends into the straps which makes it nice and seamless. The viscose shirred beautifully! It’s so important to backstitch well at the end of each line so it all stays nice and gathered.

Overall, it was a great further exploration of this pattern, and I got slightly closer to getting it just right. In fact, I’ve already made a third version which is almost perfect! Next time I think I’d put a side panel on the back bodice with the shirring in the middle because I’m not too much of a fan of seeing the shirring from the side. Although I do wonder if i’ll be able to get it on and off with the smaller panel of shirring. I guess there’s only one way to find out!

Thank you for reading!

Lauren xx

Curtain Dress

Hello all,

Again I hope that you are all as well as you can be at this time. The past few months have been incredibly quiet for me as the theatre industry has shut down, and I’ve really tried to make the effort to do as much sewing as possible. After all, I’ve found myself saying on countless occasions, “oh, if only I had the time to make this…”, and now I do. So I’ve been trying to follow through on that, give my days a little bit of purpose and am just trying to learn as much as possible. This dress is one of the products of that time.

My friend Millie left me a pair of sheer Ikea curtains in the room that I inherited from her and I’ve always thought that they would make a great dress. I do also like and appreciate them as curtains though, so took the opportunity to cut them ‘to size’ as they originally grazed the floor. This left me with two 120cm long curtain bottoms to work with.

Then I had to decide what to make. Below you can see various (very rudimentary) sketches of my thoughts. I’m having a real backless phase at the moment, so decided to follow through on that idea, using the bodice pattern from a previous make, adding the changes I’d made to the last one. (You can see some of the changes listed on that scrap of pattern paper).

Most of my headscratching was about the skirt. First, I determined that each layer was going to be double the width of my previous layer (the first layer being double my waist measurement). Then after deciding on the total length of the skirt I had to work out the length of each skirt tier, and make sure that I had enough fabric! Eventually I worked out all of the maths and had all of my strips cut out. Tiers 2 and 3 were pieced to get to the correct length.

After everything was cut out, it was a case of putting everything together. (I also quickly cut out a rectangle the same width as my first tier out of an old bedsheet for a lining, because there was no way that I was going to get away with the skirt being unlined, the fabric being as sheer as it was.) The bodice was underlined with the same sheet.

The bodice and underlining were tacked together as one and then the darts were sewn. Then the ties were sewn and turned out and sandwiched between the bodice and the facing. The skirt was actually much quicker to gather up than anticipated. The underlining layer was gathered up with tier one at the front and a channel was made to thread the elastic through the back half of the skirt. The bodice was attached, and I did little thread loops under the bust at each side of the bodice to thread my ties through.

Then all that was left to do was hand roll the 192” hem. I reckon it took me 2.5 hours? Definitely as long as Dawn French’s live show on netflix plus a bit more. And then it was done! Overall, love this dress. Love it. In essence, it’s exactly what I wanted it to be. However, I have a few niggles. Niggle 1: The darts are a bit weird. One explanation is that they aren’t in quite the right place? The other explanation that I have come up with is that I rotated too much excess into the darts, and now they are too full for my bust. Because I took 3.5cm out of the neckline and 1cm out of the side seam and that was all rotated out through the dart I think I’ve put more ease into the bust than I need? Is that possible? Next time I’m debating trying to fold out the excess at the neckline instead of rotating it out and seeing how it compares. Oh, also the back waist is a bit droopy because a) I guess the weight of the skirt pulls it down and b) the elastic isn’t as taut is I’d like it to be because that’s the length that I need to get the dress over my hips.

Anyway, all in all, good dress. Especially for twirling.

Thank you for reading!

Lauren xx

Floral Remnant Shirred-Back Crop Top

Hello all!

Surprise surprise I’ve found myself with a fair bit of time on my hands so a lot more sewing has been happening! This top was supposed to be a quick easy project between sewing scrubs but ended up taking a wee bit more time and effort than anticipated. (Don’t they all!)

The design of the top was pretty much dictated by how much fabric I had. I found a remnant of this floral viscose which I reckon was about 40cm long in a John Lewis remnant bin about a year ago, loved the print and snapped it up. Originally it was going to be a cropped shirt, but after trying to imagine wearing it I decided absolutely not.

It turned out that there was only going to be enough fabric for the front and back of something, and that it was going to have to be cropped. I started looking at images of shirred crop tops but I was worried that the print would be lost if it was all shirred up. After pondering my options for a bit I decided that the best way forward would to be to do a normal darted front bodice using my block, and adapting the my back bodice block to have a shirred back so I could get it on and off again easily without adding any fastenings.

I left the front bodice block pretty much as is, just squaring off the neckline with the centre front around mid armhole (I ended up changing the neckline later.) To work out how much fabric I wanted to be in the shirred back bodice I measured roughly around the shoulders to see how much ease I’d need to be able to get the top on and off over my shoulders. I then measured my front bodice (darts closed), subtracted that from my measurement, added a few cm and that was how wide my back piece needed to be. Cutting these 2 pieces out (both on the fold) used up pretty much all of the width of my fabric. I used the scraps to cut out some bias binding for the armholes and rectangles for the straps.

When it came to construction I essentially finished both pieces separately and the side seams were the second to last thing to do, the last being adding the straps. First step was sewing the front darts, then finishing the armholes separately with bias binding. Then the necklines and hems were finished by turning under twice and topstitching. Then it was time to shirr the back bodice. I increased the tension and the stitch length on my machine, hand wound my bobbin with shirring elastic and then I was good to go. I made sure to reverse stitch at the beginning and end of each row so that the elastic didn’t escape when stretched. Steaming the piece at the end made all of the difference as the elastic pings back into shape and tightens everything up a bit.

When the back piece was shirred it was time to sew both pieces together at the side seams, sew little rouleau loop straps, pin them on and try the top on to see how it fits. Unfortunately it wasn’t great, but I decided to persevere and try and fix it up the best I could. My main issues were as follows: The neckline was too wide, the armholes were too high and digging into my skin, the hem was too long, the straps needed lengthening and the side seams needed taking in.

The quickest things to fix were the side seams and the hem. The armholes I ended up doing a couple of times to try and get them right. First I unpicked the bias binding and brought it further towards the centre front in an effort to make the neckline less wide and to make the armhole less diggy-inny. This wasn’t the greatest fix, the armhole was still uncomfortable and I decided that the neckline would look a thousand times better if it was lightly scooped. So, I took off all of the bias binding, cut the armholes down and cut the neckline to make it slightly scooped, then rebound the edges as best I could. This was a thousand times better, although I probably could have lowered the armholes even more. I recut longer straps and pinned them on before hand stitching them down exactly where I wanted them.

I’m really glad that I took the time to make something that’s actually comfy to wear and it’s going to be super easy to make another one because now I have exactly the right measurements! My biggest change for next time would be to straighten off the top of the back bodice just below the armhole. I think that would look a lot neater. I do love the final product and I think it does a great job of making an outfit with jeans just a little more exciting.

Thank you for reading!

Lauren

Whitmoor Sweater

Hello all!

Hope you’re all as well as you can be. Today I have a fun new-ish to me hobby to share with you. I’ve recently been dressing for various operas and I realised very quickly that there were going to be long chunks of time to fill, enter knitting. I decided to make the Whitmoor Sweater pattern which was released in February by Ami of the Tailoress Studio mostly because it’s beautiful and I wanted one.

I went to Loop in Islington and their very helpful staff helped me consider the benefits of using 2 yarns together verses 1 double knit yarn. I ended up going with a DK just to keep things as simple as possible, but I choose a ‘fluffy’ one to try and retain the look of 2 yarns. It’s called Orkney Angora (50% angora 50% wool), I paid £61.25 for 5 balls and throughout the knitting process it never let me forget the fluffiness that I chose it for. The little bits of fluff got everywhere, and I’m hoping that it will gradually stop losing fluff the more I wear it. The most important part is that it’s not itchy or uncomfortable to wear against the skin at all.

In terms of the knitting up, the lace part of the yoke was really good to be able to concentrate on at work and the plain knitting was perfect to accompany TV watching. I did get stuck at 2 or 3 points but Ami always replied quickly on Instagram to sort me out which I much appreciated! Once the lacey bits were done the rest came together quite quickly. I’m so proud of the lacework. It’s not something I’ve attempted before, and it worked out remarkably well. The execution may not be perfect in places but you definitely get the gist of what the pattern is supposed to look like! Whenever there a technique came up that I wasn’t completely sure about I’d pop over to youtube which would tell me exactly how to go about things.

Measurements wise, my bust is a couple inches smaller than the smallest size in the pattern but I wasn’t comfortable with the concept of grading down a knitting pattern so figured I’d just go for baggy. I started the ribbing 20” down from the armhole which makes it slightly shorter than specified. I wish I’d gone slightly shorter so it would work better with dresses and skirts. The sleeves I did between the length of the tapered and bell sleeves because I didn’t want them to be too baggy.

When I was looking for a jumper to knit my number one criteria was quite a tight neckline. The reason I didn’t really wear the jumper I made for my dissertation was because the neckline was too wide and it just didn’t look good with t-shirts worn underneath. I found it quite hard to find jumpers with narrower necklines and whilst this one is depicted with a narrower neckline mine is slightly wider than I would like. My theory is that my cast on is too stretchy so the neckline doesn’t keep it’s stretch as well?

All in all I consider it a humongous triumph. I’ve just had a lot of fun dyeing some yarn with natural dyes over the last few weeks so I’m excited to knit that up into all sorts of fun stuff. Let me know if the dyeing process is of interest to any of you!

Thanks for reading!

Lauren xx

Christmas Top

Hello all!

I’ve found myself sat on the sofa with nothing to do for the first time in a while and thought that it’s about time that I wrote a blog post! This top I made to wear on Christmas day. The colours are just so festive! I bought a metre of this viscose fabric from Cloth House last year because I just loved the colours and the print. I’ve had lots of different thoughts on what to make with it over the past year but at the end of the day I wanted big sleeves and the lack of fabric pretty much orchestrated the rest of the design.

First of all, let’s discuss making the pattern. I used the sleeve pattern I originally drafted for my hippy dress last year, slashed and spread at the top so I could have some gather. Then I adapted my bodice block to a wrap bodice with a midriff panel just at the front.

The construction was fun to puzzle over. The side seams ended up being one of the last things that I sewed! I started with shoulder seams, the underbust gathers and finishing the neckline with bias binding. Then it was time to sew the ties which were then bagged inbetween the midriff panel and lining. The back bodice was hemmed with bias binding and then it was time for the side seams! I sewed the elasticated cuffs into the sleeves before finally inserting them into the bodice and the whole thing was done!

So now that I’ve discussed the process of putting it together how do I feel about it? I love the fabric, I love the sleeves. I’m not convinced about the how the low neckline works on me considering that I’m not particularly blessed in the bust region, and I wonder where it would be more flattering if I replaced the bust gathers with longer tucks but I had so much fun working out how to put this one together I don’t mind at all! In fact I look forward to bringing it out again for next years festive season. I do want to find something better to pair it with next year though!

Thank you so much for reading if anyone is still in fact reading!

Lauren xx